Nationwide Commercial & Industrial Gas Burner Servicing — All Makes, All Types, All Locations

At SMR Gas Maintenance Ltd, we provide specialist commercial and industrial gas burner servicing across the UK  from single burner units in small commercial premises to complex multi-burner installations in care homes, factories, warehouses, food production facilities, and large industrial plants.Whether you operate a care home in Lancashire, a warehouse in the Midlands, a food production facility in Yorkshire, a hotel in London, or a manufacturing plant anywhere across the UK  if it has a gas burner, we service it. 

This guide covers every type of commercial and industrial gas burner we service, the makes and models we cover, what a proper service includes, your legal obligations, and how to set up a planned maintenance programme  wherever you are in the UK.

What Is a Commercial Gas Burner Service?

A commercial gas burner is the combustion component at the heart of virtually every gas-fired heating or process system  boilers, warm air heaters, radiant tube heaters, cabinet heaters, unit heaters, process ovens, catering equipment, and industrial process heating equipment all rely on a gas burner to produce heat safely and efficiently.

Unlike domestic boilers where the burner is a sealed unit serviced as part of the boiler, commercial and industrial burners are often standalone forced draught or natural draught units sometimes with modulating or staged combustion  that require specialist Gas Safe registered engineers with commercial ACS qualifications to service correctly.

A burner that hasn't been properly serviced will typically show one or more of the following:

• Reduced efficiency — burning more gas to produce the same heat output
• Elevated carbon monoxide production — a safety risk to anyone on the premises
• Ignition problems and lockouts — production delays and heating failures
• Increased wear on downstream equipment — premature heat exchanger and component failure
• Non-compliance with Gas Safety Regulations — insurance and regulatory exposure

Annual burner servicing is not optional. 

It is a legal requirement under the Gas Safety (Installation and Use) Regulations 1998 for all commercial and industrial gas appliances.

Every Type of Gas Burner We Service — Nationwide

Commercial Boiler Burners

Commercial boiler burners are the most common type of commercial gas burner across the UK — found in offices, care homes, hotels, schools, hospitals, factories, warehouses, and virtually every commercial building with central heating or hot water.We service commercial boiler burners of all types including:

• Forced draught burners — the most common type on commercial and industrial boilers, using a fan to supply combustion air at controlled pressure
• Natural draught burners — found on older commercial boilers and some smaller commercial units
• Modulating burners — variable output burners that adjust firing rate to match demand, improving efficiency and reducing cycling
• Two-stage burners — high/low firing rate burners common on medium commercial boilers
• Fully modulating premix burners — high-efficiency burners found on modern condensing commercial boilers

We carry out full combustion analysis, burner strip and inspection, ignition system testing, gas valve and pressure checks, safety device verification, and a full written service report — with a CP16 certificate issued on satisfactory completion.

Boiler burner brands we service nationwide: 

Riello, Weishaupt, Nu-Way, Bentone, Elco, Ecoflam, Kroll, Lamborghini, Baltur, Cuenod, Dunphy, Wayne, Powerflame, and all other commercial boiler burner manufacturers.

Warm Air Heater Burners

Warm air heaters are one of the most widely used heating systems in warehouses, factories, workshops, garages, sports halls, churches, schools, and large commercial spaces across the UK. The burner is the heart of the system  and a poorly maintained warm air heater burner is both a safety risk and an efficiency drain.We service warm air heater burners across all configurations including direct-fired, indirect-fired, gas-fired cabinet heaters, and suspended unit heaters.

Warm air heater brands we service nationwide: 

Powrmatic, Reznor, Benson, Combat, Andrews, Biddle, Consort, Ambirad, Hoval, Thermoscreens, and all other makes.Services include burner strip and clean, heat exchanger inspection, combustion analysis, fan and air flow checks, flue inspection, safety control testing, and full written report.

Radiant Tube Heater Burners

Radiant tube heaters are the dominant heating solution in large-span, high-ceiling industrial buildings  warehouses, distribution centres, manufacturing plants, and logistics facilities. The burner fires into a sealed radiant tube, generating infrared heat that warms the floor and occupants directly rather than the air.Radiant tube heater burners require specific servicing competence  the heat exchanger tube inspection, combustion analysis, and flue integrity checks are critical safety elements that a non-specialist will miss.

Radiant tube heater brands we service nationwide: Ambirad, Reznor, Powrmatic, Combat, Space-Ray, Benson, Roberts Gordon, Schwank, Herz, and all other makes.

Radiant Plaque Heater Burners

Radiant plaque heaters  also known as luminous radiant heaters use a ceramic or metallic plaque burner to produce intense infrared radiation at lower mounting heights than tube heaters. Common in workshops, garages, farm buildings, and smaller industrial units.We service all makes of radiant plaque heater burners including Ambirad, Schwank, Space-Ray, Solaronics, and all other manufacturers.

Cabinet and Unit Heater Burners

Gas-fired cabinet heaters and unit heaters are used across a wide range of commercial and light industrial applications — retail spaces, workshops, agricultural buildings, temporary structures, and smaller commercial premises.We service all makes of cabinet and unit heater burners including Ambirad, Reznor, Powrmatic, Combat, and all other makes across the UK.

Commercial Kitchen Catering Burners

Commercial kitchens in restaurants, hotels, pubs, takeaways, care homes, schools, hospitals, and workplace canteens operate gas-fired catering appliances under demanding conditions — ranges, fryers, griddles, ovens, grills, combi steamers, pasta cookers, wok burners, and all other catering equipment.We service commercial catering burners of all types, carry out gas interlock system testing, and issue CP42 Gas Safety Certificates for commercial kitchens nationwide

Commercial catering equipment brands we service:

Falcon, Rational, Combi-Steam, Lincat, Blue Seal, Hobart, Electrolux Professional, MKN, Charvet, Garland, Imperial, and all other commercial catering equipment manufacturers.

Industrial Process Burner Servicing

Industrial process burners are the most demanding category of commercial gas burner operating at high temperatures, often continuously, with combustion requirements tied directly to product quality and process consistency. Found in food production, bakery, pharmaceutical, chemical processing, automotive finishing, powder coating, plastics, and general manufacturing across the UK.We service industrial process burners of all types including:

• Packaged forced draught process burners — Riello, Weishaupt, Eclipse, Maxon, Nu-Way, Lanemark, Dungs
• Direct gas-fired process heaters — make-up air units, direct-fired tunnel ovens, direct-fired dryers
• Radiant tube process burners — ceramic and metallic radiant tube burners in industrial ovens and kilns
• Low NOx and ultra-low NOx burners — specialist burners in environmental compliance applications
• Premix process burners — high-efficiency burners in precision temperature applications
• Burner management systems — Honeywell, Siemens, Fireye, Autoflame, Kromschröder

Process burner services include full burner strip and inspection, combustion analysis and tuning, flame safeguard testing, safety interlock verification, gas valve testing, refractory inspection, and full written report.

LPG Burner Servicing

All of the above burner types are available in LPG configurations — particularly common in rural locations, temporary sites, mobile catering, agricultural premises, and any commercial property not connected to the mains gas network.SMR Gas Maintenance Ltd are qualified for both natural gas and LPG commercial and industrial burner servicing across all of the UK.

What Does a Commercial Gas Burner Service Include?

Every commercial and industrial gas burner service carried out by SMR Gas Maintenance Ltd includes:

• Burner strip and inspection — full strip of the burner assembly, inspection of all components including combustion head, electrodes, nozzles, diffuser, and seals
• Combustion analysis — calibrated flue gas analysis measuring CO₂, O₂, CO, flue gas temperature, and combustion efficiency
• Combustion tuning — air-to-fuel ratio adjusted to achieve safe, efficient combustion
• Ignition system testing — spark igniter, ignition transformer, pilot burner where fitted, ignition sequence timing
• Flame safeguard testing — flame detection, lockout sequence, safety shutdown verification
• Gas valve testing — valve operation, opening and closing times, seat leak test
• Safety device verification — all safety interlocks, overheat thermostats, pressure switches
• Gas pressure checks — supply and manifold pressures recorded against manufacturer specifications
• Flue system inspection — integrity, blockage, corrosion, connections
• Full written service report — all findings, combustion readings, safety test results, defects identified, and recommendations

Legal Requirements — Why Annual Burner Servicing Is Not Optional

The Gas Safety (Installation and Use) Regulations 1998 place a clear legal duty on all employers and commercial property operators to ensure gas appliances are maintained in a safe condition by a Gas Safe registered engineer. This applies to every gas burner on every commercial and industrial premises across the UK  without exception.In addition, the Health and Safety at Work Act 1974 and PUWER 1998 require employers to maintain work equipment  including gas-fired process and heating equipment in efficient working order and good repair.The consequences of non-compliance are serious:

• Insurance void — most commercial policies require evidence of annual servicing
• HSE enforcement — improvement notices, prohibition notices, and in serious cases prosecution
• Carbon monoxide risk — an unserviced burner can produce elevated CO levels, which is a risk to life for anyone on the premises
• Production and operational failure — unplanned burner breakdown is always more costly than planned maintenance

Planned Preventative Maintenance Contracts — Nationwide

For businesses operating multiple gas burners across single or multiple sites, a Planned Preventative Maintenance (PPM) contract with SMR Gas Maintenance Ltd is the most cost-effective and compliance-assured approach to burner maintenance.Under a PPM contract we:

• Schedule all annual services to align with your operational requirements and planned shutdowns
• Maintain a full service history for every burner on every site
• Provide consolidated compliance documentation for insurance and regulatory purposes
• Offer priority emergency response for PPM contract clients
• Provide a single point of contact for all gas burner maintenance across your estate

PPM contracts are available for single-site businesses, multi-site operators, care home groups, hotel chains, retail estates, warehouse portfolios, and national manufacturing businesses anywhere across the UK.

Areas We Cover — Truly Nationwide

SMR Gas Maintenance Ltd operate nationwide from our Preston base. We cover every region of the UK including

North West 

 Preston, Lancashire, Manchester, Merseyside, Cheshire, Cumbria, Blackburn, Burnley, Bolton, Wigan, Warrington, Stockport, Salford

Yorkshire & Humber 

Leeds, Sheffield, Bradford, Hull, York, Wakefield, Huddersfield, Doncaster, Barnsley

North East 

 Newcastle, Sunderland, Middlesbrough, Durham, Gateshead, Darlington

Midlands

 Birmingham, Coventry, Leicester, Nottingham, Derby, Stoke, Wolverhampton, Walsall, West Bromwich

East of England 

Norwich, Cambridge, Peterborough, Ipswich, Luton, Chelmsford

South East 

 London, Reading, Oxford, Milton Keynes, Brighton, Southampton, Portsmouth, Guildford

South West 

 Bristol, Exeter, Plymouth, Swindon, Bath, Gloucester, Cheltenham

Wales

 Cardiff, Swansea, Newport, Wrexham

Scotland 

 Glasgow, Edinburgh, Aberdeen, Dundee, InvernessNo matter where your premises are located across the UK — if you need a Gas Safe registered commercial or industrial gas burner engineer, SMR Gas Maintenance Ltd can reach you.

Why Choose SMR Gas Maintenance Ltd for Burner Servicing?

• Gas Safe registered — Gas Safe No. 562186 — all engineers fully qualified for commercial and industrial gas work
• Specialists in commercial and care sector — our core focus is commercial premises and the care sector, where compliance and reliability are non-negotiable
• All makes, all types — we service every commercial and industrial gas burner make and model across the UK
• 24/7 nationwide call-out — emergency burner breakdown response available around the clock, anywhere in the UK
• Full written documentation — service reports, compliance certificates, and PPM records provided on every visit
• No domestic work — 100% commercial and industrial focus

Book a Commercial Gas Burner Service — Anywhere in the UK

📞 Mobile: 07882 898492 — 24/7 Nationwide Call-Out 📧 Email: andy@smrgasservices.co.uk🌐 www.smrgas.co.ukGas

SMR Gas Maintenance Ltd 

 Safe Register No: 562186

 24/7 Nationwide Call-Out

 10 Cann Bridge Street, Higher Walton, Preston 

Mobile: 07882 898492 | Email: andy@smrgasservices.co.uk | Web: www.smrgas.co.uk | Gas Safe Register No: 562186